Elcon UHF 6.6 kW Charger w/CANbus

$1,747.00

Click here to learn more about our Engineering Consultations today!

Elcon UHF 6.6kW CANbus Charger Manual

6.6KW UHF chargers are available in the following models. The first number is the maximum voltage and the second number is the maximum current.

HK-J-H66-80 provides 18-66VDC output

HK-J-H99-80 provides 25-99VDC output

HK-J-H132-64 provides 34-132VDC output

HK-J-H198-46 provides 50-198VDC output

HK-J-H440-20 provides 110-440VDC output

HK-J-H650-12 provides 170-650VDC output

Overview:

HK-J series 6.6kW charger was specially designed supplying the electricity for the electric vehicle's power battery, on the basis of the national standards for the charger. This product has the advantages of not only high efficiency, small size, high stability, long lifespan, but also high protection grade, and high reliability and complete protection function, etc. It's definitely an ideal charging power supply for electric vehicles. This charger has a built-in heat-sensing device and can automatically recover through the thermal protection. Fully sealed potting process and up to IP67 protection level ensures that it will not cause any trouble even in a complex environment.

Main Feature:

Fully Sealed, Enforce Air Cooling (Module Optional)
Reliable working under -35C to +85C
Internal temperature Sensor
Shut off inside temperature over 90C
IP67 Protection Level
Working well in immersion shortly

Essential Parameter:

Input Current	DC Output Voltage Range	Max Output Current	Power Factor	Full Load Efficiency
48V80A	18-68VDC	80A	0.99	93%
72V80A	50-198VDC	80A	0.99	93%
96V64A	34-132VDC	64A	0.99	93%
144V46A	50-198VDC	46A	0.99	93%

Features:
Input:

Items	Data
AC Input Range	AC 90-265V
Frequency	45-65Hz
Input Current	≤32A
Power Factor	≥0.99 Half loading
Efficiency	≥93% Full loading
Standby Consumption	≤10W

Main Output:

Items	Data
Output Mode	CV/ CC
Output Voltage	6600W @ 220VAC; 3300W @ 220VAC
CV Accuracy	+/- 1%
CC Accuracy	+/- 2%
Ripple Voltage Coefficient	5%

Low Voltage Output:

Output Mode	CV
Output Voltage	13.8V/ 27.6V
CV Accuracy	+/- 1%
CC Accuracy	+/- 2%
Ripple Voltage Coefficient	5%

CAN Communications:

CAN Communication	Optional
Baud Rate	125Kbps, 250Kbps, 500Kbps
Terminal Resistance	NO

Protection Feature:

Input Over-Voltage Protection	AC285+/-5V
Input Under Voltage Protection	AC85+/-5V
Output Over-Voltage Protection	Stop the output when exceeds + 1% of the maximum output voltage
Output Under-Voltage Protection	Stop the output when below -5% of the minimum output voltage
Output Over-Current Protection	Stop the output when exceeds + 1% of the maximum output current
Over-Temperature Protection	Power down from 85°C and shut off at 90C
Short-circuit Protection	Stop Output
Battery Reverse Connect Protection	Fuse Burned-out
Ground Protection	≤100 mΩ
CAN communication Protection	Automatically stop the output when CAN communication fails
Power-off Protection	YES

Safety and others:

Withstand Voltage	Input to Output: 2000VAC≤10mA Input to Ground: 2000VAC≤12mA Output to Ground: 2000VAC≤10mA, all 1 min
Insulation Resistance	Input, Output, signal terminal to casing≥10mΩ Testing Voltage 1000VDC
Electromagnetic Immunity	GB/T 18487 3-2001 11.3.1
Electromagnetic Abusive	GB/T 18487 3-2001 11.3.2
Harmonic Current	GB 17625 1-2003 6.7.1.1
Inrush Starting Current	≤24A
Current-rise Time	≤5S, Overshoot ≤5%
Close response Time	100% 10%≤50mS, 100% 0%≤200mS
Anti-Vibration	10-25Hz Amplitude 1.2mm, 25-500Hz 30ms2, 8hrs per direction
Noise	≤60dB(A)
MTBF	150000H
Work Environment	Relative Temp 5%-95% No condensation
Working Temperature	-35°C - +85°C
Storage Temperature	-55°C - +100°C

← Back to Chargers - Elcon