-
HK-J-H66-40 Manual
HK-J-H99-40 Manual
HK-J-H132-32 Manual
HK-J-H198-23 Manual
HK-J-H440-10 Manual
HK-J-H650-6 Manual
Description
3.3KW UHF chargers are available in the following models. The first number is the maximum voltage and the second number is the maximum current.HK-J-H66-40 provides 18-66VDC output
HK-J-H99-40 provides 25-99VDC output
HK-J-H132-32 provides 34-132VDC output
HK-J-H198-23 provides 50-198VDC output
HK-J-H440-10 provides 110-440VDC output
HK-J-H650-06 provides 170-650VDC output
The HK-J series 3.3KW charger is designed for electric vehicle battery and battery management system interface. The product not only has high efficiency, small size, high stability, long life and other advantages, but also has a high degree of protection, highly reliable, full-featured protection and other features. The ideal power source for charging electric vehicles. Built-in thermal sensing device gives thermal overload protection that is automatically reset when cooled. Fully sealed encapsulation process, up to IP67 protection class, you can employ in any difficult environment without causing failure.
Main features
Full casting process, air-cooled or water-cooled, can work reliably under conditions -40- + 60 degrees.Weight
8.9 lbs (3.9kg) without heatsink or fan.Specifications
Models
HK-J-H 99-40, 132-32, 198-23, 440-10
I
N
P
U
T
Input Voltage
AC 85~265V
Frequency
45-65Hz
Input Current
16A
Power Factor
≥0.99 at over half power
Efficiency
≥94% at full power
Idle Power
≤5W
O
U
T
P
U
T
Output
CV / CC
Output Ranges
25-99V, 33-132V, 50-198V, 110-440V
Output current Limits
Maximum 40A, 32A, 23A, 10A
Output Power
3300W @220vac or 1600W@110VAC
Voltage Accuracy
±1%
Current Accuracy
±2%
Ripple voltage
5%
A
U
X.
O
U
T
P
U
T
12V Power Supply
Output Voltage
12.5V
Current Rating
5A
Current Accuracy
±2%
Max. Current
5.5A±0.5A
Output Power
≥62.5W
Ripple Voltage
1%
P
R
O
T
E
C
T
I
O
N
Input Overvoltage
AC270±5V
Input Under-voltage
AC80±5V
Output Overvoltage
1% over max voltage limit stops output
Output Under-voltage
5% below minimum voltage stops output
Output Overcurrent
1% over max. output current stops output
Over Temp. Protection
85deg C starts reduced power, over 90deg stops output
Short Circuit Protection
Output stops
Reverse battery protection
Blown Fuse
Ground Protection
≤0.1milliohms
CAN Com. Protection
Communication failure stops output
C
O
M
CAN Communications
CAN IDs E5, E7, E8 and E9
Baud Rate options
125Kbps, 250Kbpsm, 500Kbps
Terminating resistor
Not included
S
A
F
E
T
Y
Galvanic Isolation
Input to output: 2000VAC≤10mA input to ground: 2000VAC≤10mA
Output to ground: 2000VAC≤10mA, are 1minInsulation Rating
Input to output, the signal end of the housing ≥10M Europe, the test voltage 1000VDC
Electromagnetic Immunity
Meet GB / T 18487.3-2001 11.3.1 Article
Electromagnetic noise
Meet GB / T 18487.3-2001 11.3.2 Article
Harmonic Current
Meet GB 17625.1-2003 6.7.1.1 Article
Inrush Current
≤6A
Current Rise Time
≤5S, overshoot ≤5%
Stop response time
100% to 10% ≤50mS, 100% to 0% ≤200mS
Protection Class
IP67
Vibration Resistance
10-25Hz amplitude of 1.2mm, 25-500Hz 30m / s2, 8 hours a direction
Noise
≤60dB
MTBF
150000H
Working Environment
Relative humidity 5% -95% non-condensing
Operating Temperature
-40 ~ 60℃
Storage temperature
-55℃~ +85℃
Over-temperature protection
Stops when over 90deg C, resumes operating when cooled.