Andromeda EVIC Display - EVolve Electrics
Andromeda EVIC Display - EVolve Electrics
Andromeda EVIC Display - EVolve Electrics
Andromeda EVIC Display - EVolve Electrics
Andromeda EVIC Display - EVolve Electrics

Andromeda EVIC Display

Regular price $865.00
Unit price  per 

Description

Download the Andromeda EVIC CAD Model

Features and Capabilities

EVIC is a compact LCD color display with integrated CAN channel and digital and analog interfaces. EVIC can be configured to show a variety of data sets from battery management systems, motor controllers, chargers, and vehicle control units. EVIC includes the following features:

Features
Descriptions
Display Size

Diagonal 7.0"
Active area (mm) 152.4(H)×91.4 (V)

Display Resolution 800 x 480 WVGA
Color Depth 16-bit
Brightness 300 nits
Input Voltage 9-36 VDC
CAN Channels

1
Configurable baud rates 125, 250, 500 kbps and 1Mbps

CAN Isolation 2.5 kV RMS (ISO1050DUB)
Digital I/O

8, 18V tolerant inputs
8, 2A sinking outputs

Analog Inputs 5, 12-bit resolution
Graphics

Custom boot screen logos and skin graphics

Development Environment

Studio Interface Kit (SIK) software tool for creating and updating HMI skin graphics

Software Development Kit (SDK) full customization and programming (available upon request)

Figure 1: Default User Interface

Mechanical Package

 


EVIC can be mounted onto a system using the 4 holes on the front bezel.
EVIC is packaged with automotive grade connectors.

General:

Do not attempt to open the display as there are no serviceable components. Opening the display will invalidate the warranty. Note: There are exceptions to terminate and not terminate CAN Lines. Please contact us prior to removing the back cover to access CAN termination. 

Electrical

Operating
Working Voltage Limits: 9 - 36 VDC
Input Protection:

Input protected against reverse connection of supply. 

The nominal current draw of 300 mA @ 12 VDC.

Output Protection
Reverse Polarity: SAE J1455 2006 ed. 
Inductive Switching: SAE J1113-11 2006 ed. Test Pulse 1
ESD: SAE J1113-13 2004 e. Powered and Non-Powered.
CAN Interface
Protocol: CAN 2.0B 
Isolation: 2.5kV VRMS Isolation (ISO1050DUB)
Baud Rates Supported: 125, 250, 500 kbps and 1 Mbps
Digital Interfaces
Inputs: 18V tolerant digital inputs, x8
Outputs: Low-side switching outputs up to 2A, x8
Analog Interfaces
Inputs: 0-5V 12-bit resolution analog inputs, x5

Mechanical

 Operating Environment
Operating Temperature: -20°C to 70°C
Non-Operating Temperature: -30° to +80°C
Humidity: 95%(non-condensing) at 40°C and 2% at 40°C
Ingress of Dust and Water: IP54
Performance
Vibration, Random: designed to meet SAE J1211 standards
Shock: designed to meet SAE J1211 standards
Weight
Weight: 1.4 kg

EVIC is equipped with the following 3 interface connectors as shown below.

J1- 20-pin Main Connector - Power, CAN and Digital Inputs
Housing: Molex part number 31408-1200
Terminals: Molex part number 1393366-1

                        

J2 & J3 - 12-pin Secondary Connectors - J2 Analog Inputs and J3 Digital Outputs
Housing: Molex part number 31408-1120
Terminals: Molex part number 1393367-1                               


J4 - Mini-B USB Connector - Programming cable used for SIK
The cable is provided with the purchase of EVIC.

Harness Connections

J1 - MAIN CONNECTOR PINOUT

PIN

Name

Type

What to Connect

Maximum Rating

1

+12V POWER

Power

Constant power source

+32V

2

GND

Power

Power source return

-

3

IGN

Power

Switch power

+32V

4

CAN_HIGH

Comm

CAN High

-

5

CAN_LOW

Comm

CAN Low

-

6

DIN 7

Digital Input

Switches, buttons

+18V

7

DIN 6

Digital Input

Switches, buttons

+18V

8

DIN 1

Digital Input

Switches, buttons

+18V

9

DIN 2

Digital Input

Switches, buttons

+18V

10

DIN 3

Digital Input

Switches, buttons

+18V

11

DIN 4

Digital Input

Switches, buttons

+18V

12

DIN 5

Digital Input

Switches, buttons

+18V

13

RXD_EXT

Comm

RS-232 (diag only)


14

TXD_EXT

Comm

RS-232 (diag only)


15

RTS_EXT

Comm

RS-232 (diag only)

-

16

CTS_EXT

Comm

RS-232 (diag only)


17

DIN 8

Digital Input

Switches, buttons

+18V

18

AIN_5_Signal

Analog Input

Sensor signal

+5V

19

BOOT 1

Boot Mode

Short Pins 19 and 20 to place EVIC into boot mode


20

BOOT 2

Boot Mode

Short Pins 19 and 20 to place EVIC into boot mode



J2 - ANALOG INPUT CONNECTOR PINOUT
Pin Name Type What to Connect Rating

1

AIN_1_Signal Analog Input

Sensor signal

+5V
2 AIN_1_Reference Power 5V power output -
3 AIN_1_Ground Power 5V reference ground  -
4 AIN_2_Signal Analog Input Sensor signal +5V
5 AIN_2_Reference Power 5V power output -
6 AIN_2_Reference Power 5V reference ground  -
7 AIN_3_Signal Analog Input Sensor signal +5V
8 AIN_3_Reference Power 5V power output -
9 AIN_3_Reference Power 5V reference ground  -
10 AIN_4_Signal Analog Input Sensor signal +5V
11 AIN_4_Reference Power 5V power output -
12 AIN_4_Reference Power 5V reference ground  -
J3 - DIGITAL OUTPUT CONNECTOR PINOUT
Pin Name Type What to Connect  Rating
1 DOUT_1 Digital Output LED's, Relays, Buzzers 2A
2 DOUT_2 Digital Output LED's, Relays, Buzzers 2A
3 DOUT_3 Digital Output LED's, Relays, Buzzers 2A
4 DOUT_4 Digital Output LED's, Relays, Buzzers 2A
5 DOUT_5 Digital Output LED's, Relays, Buzzers 2A
6 DOUT_6 Digital Output LED's, Relays, Buzzers 2A
7 DOUT_7 Digital Output LED's, Relays, Buzzers 2A
8 DOUT_8 Digital Output LED's, Relays, Buzzers 2A
9 GND Power Power source return -
10 GND Power Power source return -
11 GND Power Power source return -
12 GND Power Power source return -


Interfaces

Digital Inputs

EVIC is equipped with 8 digital inputs that can determine input states from switches or buttons. Digital inputs 1 through 7 are triggered by sourcing +12V. Digital input 8 is triggered by sinking to GND.

DIN 1 - 7                                                    DIN 8

            

If you have not correctly mapped the digital inputs to skin graphic labels or images, then nothing will occur when switching these pins.

Digital Outputs

EVIC is equipped with 8 digital outputs that are low-side switches. They are designed for a variety of applications including LEDs, external relays or buzzers.

Analog Inputs


EVIC is equipped with 5 analog inputs (1 on the main connector, 4 on the analog input connector) at 12-bit resolution. They can be used to read measurements from many sensors such as temperature, potentiometer or brake transducers. There are reference 5V and ground outputs provided on the analog input connector to supply power to sensors if necessary.

AIN 1 - 5

   

CAN Channel

EVIC can operate as a single node or as a multi-node on the CAN bus network.

EVIC can be configured as either terminated or non-terminated on the network. EVIC is shipped terminated. You can un-terminate by taking apart EVIC's back cover and removing an internal jumper (P2) on the board.

Baud Rate

EVIC is configured by default at 250 kbps baud rate. EVIC's configurable baud rates are 125, 250, 500 or 1000 kbps.

Note: If data does not appear or is displayed intermittently, please verify CAN baud rates are set correctly for all components on the network.

Principle of Operation

Functional Description

EVIC decodes CAN bus data into human-readable form and displays it onto the HMI screen. EVIC is a standalone display device and is configurable with our Studio Interface Kit.

Wiring

EVIC uses the following 3 Molex connectors and crimp terminals: 

Connector
Manufacturer
Pins

Connector Part Number

Terminal Part Number

Power / CAN / Digital Input

Molex / Tyco 20 31408-1200 1393366-1 
Analog Input Molex / Tyco 12 31408-1120 1393367-1
Digital Output Molex / Tyco 12 31408-1120 1393367-1

You can purchase these separately through Digi-key or Mouser, or request for them when you place your order.

This universal crimper tool can be used for the terminals.

General Set-up

To get started, wire Pins 1 and 3 (VBAT) to +12V or +24V and Pin 2 (GND) to Ground. Once power is applied, the default splash screen will be displayed and will transition to the Graphical User Interface (GUI) application.

Default Splash

The default splash screen is configurable. To replace the default splash screen image, Andromeda's Flasher Tool is available to make this change. 

Graphical User Interfaces

The start-up GUIs will appear as shown below. These GUIs are configurable through our Studio Interface Kit (SIK).

EVIC.Combo

EVIC.BMS

The diagrams below can be used as a reference to create your own EVIC harnesses. Complete harnesses can be purchased at Andromeda.

J1 - Main Power / CAN / Digital Input Harness

Housing: Molex part number 31408-1200
Terminals: Molex part number 1393366-1
This universal crimper tool can be used for the terminals.


J2 - Analog Input Harness

Housing: Molex part number 31408-1120
Terminals: Molex part number 1393367-1  
This universal crimper tool can be used for the terminals.


J3 - Digital Output Harness

Housing: Molex part number 31408-1120|
Terminals: Molex part number 1393367-1  
This universal crimper tool can be used for the terminals.