Hyper 9 IS Motor Kit
NetGain HyPer 9 IS — 100 V Class SRIPM Motor + X1 Inverter
Brushless SRIPM drive system for light–mid weight EV conversions. Class-leading torque, real efficiency, compact packaging. The kit bundles the HyPer 9™ motor, HyPer-Drive X1 controller, LV harness, and GV200QA main contactor—tuned with SmartView.
- DC 62–130 V
- Up to 750 A peak
- Up to 95% efficiency
- Regen braking
Kit includes: HyPer 9™ IS motor, HyPer-Drive X1™ controller/inverter, LV harness, GV200QA contactor.
Why builders choose HyPer 9 IS
SRIPM efficiency
Brushless, cageless rotor minimizes losses → less heat, higher real-world efficiency.
Big torque, broad speed
~173 lb-ft at launch and strong field-weakening headroom (see power graph in Downloads).
Tunable control
FOC optimized for SRIPM, customizable I/O, tailorable regen—dial in drive feel with SmartView.
What’s in the kit
- HyPer 9™ IS SRIPM motor (100 V nominal class)
- HyPer-Drive X1 Controller/Inverter (compact)
- Low-voltage wire harness
- GV200QA main contactor
Notes
- B-Face (WarP 9) mount; single-ended keyed shaft.
- Use proper pre-charge, HVIL, fusing, and interlocks.
- Regen available and tailorable via SmartView profiles.
Technical specifications
| DC Supply Voltage | 62–130 V (100 V nominal) |
|---|---|
| Peak Current | Up to 750 A |
| Efficiency (peak) | Up to 95% |
| Peak Power | ~100 kW @ 125 V |
| Continuous Power | ~35 kW @ 125 V |
| Peak RPM | 8,000 |
| Continuous RPM | ~3,300 |
| Torque (low-speed) | ~173 lb-ft |
| Regeneration | Yes — configurable |
| Motor Diameter × Length | 8.66″ × 13.976″ |
| Motor Weight | ~120 lb |
| Controller Weight | ~9 lb |
| Shaft | 1.125″ dia., 1/4″ keyway, single-ended |
| Mount | B-Face (WarP 9 pattern) |
| Insulation Class | Class “H” |
| Software | SmartView |
Validate gearing, thermal limits, duty cycle, and protection (pre-charge, contactors, BMS interlocks) against your application.
Applications
Daily-driver conversions
Light–mid weight cars/trucks seeking efficient, responsive drive feel.
Specialty EVs
Utility buggies, neighborhood EVs, light commercial platforms.
Performance builds
Tap field-weakening headroom; manage thermals for repeatability.
R&D / prototyping
FOC control with SmartView data for rapid iteration.
Accessories & options
Chill Plate (Controller cooling)
5/8″ thick 6061 plate with 1/8″ NPT ports. Matches X1/X144 base. Includes liquid gasket.
- Controller operating: −40 °C to +95 °C; thermal cutback ~+80 °C
- ~750 A for 2 min without plate (properly mounted)
- Liquid loop can yield ~2–3× stock duty cycle
- Recommended for >200 A continuous
SME Compact Display
Optional LCD for Hyper-Drive controllers.
- Speed (MPH/KM/H), SOC, highest-priority fault
- Derate indication (motor/inverter thermal)
- Cycle profiles (E/S/H); requires clone file setup
- Diagnostic mode: RPM, temp, torque, current, etc.
Throttle Pedal (0–5 V)
Recommended 0–5 V potentiometer pedal assembly for X1 controllers.
Ordering & shipping
- Freight policy: Checkout quotes commercial delivery. Residential may require LTL terminal pickup or an added fee.
- Lead times vary by configuration; contact us for current stock and scheduling.
- For adapters, mounts, and multi-system builds, reach out for application support.
Downloads
Couldn't load pickup availability
Pickup available at EVolve Electrics Office
Usually ready in 24 hoursPairs well with
Hyper 9 IS Motor Kit
If you have any questions, you are always welcome to contact us. We'll get back to you as soon as possible, within 24 hours on weekdays.
-
Shipping Information
Use this text to answer questions in as much detail as possible for your customers.
-
Customer Support
Use this text to answer questions in as much detail as possible for your customers.
-
FAQ’s
Use this text to answer questions in as much detail as possible for your customers.
-
Contact Us
Use this text to answer questions in as much detail as possible for your customers.